II. Trying it out.

II. Trying it out.

Wouldn't it stink if you decide to wipe out your hard drive and install
Linux as the sole operating system only to learn that you don't know
how to do anything and hate it? Wouldn?t it be better to take a test
drive? 95 out of a 100 of you know where I'm heading with this section
and can therefore skip it. For those of you who don't know, read on.

There are many distros, and most distros try to have something that
makes them stand out. Knoppix was the first live-CD distro. Although
most of the other main distros have formed their own live-CDs, Knoppix
is still the most famous and I will be covering how to acquire it.

A live-CD distro is a distribution of Linux in which the entire OS can
be run off of the CD-ROM and your RAM. This means that no installation
is required and the distro will not touch your hard disk or current OS
(unless you tell it to). On bootup, the CD will automatically detect
your hardware and launch you into Linux. To get back to Windows, just
reboot and take the CD out.

Go to the Knoppix website (www.knoppix.com). Look around some to get
more of an idea on what Knoppix is. When you're ready, click Download.
You'll be presented with a large amount of mirrors, some of which have
ftp and some of which have http also.

note: the speed of the mirrors vary greatly, and you may want to
change mirrors should your download be significantly slow.

Choose a mirror. Read the agreement and choose accept. You'll probably
want to download the newest version and in your native language (I'll
assume English in this tutorial). So choose the newest file ending in
-EN.iso

note: you might want to also verify the md5 checksums after the
download, if you don't understand this, don't worry too much. You just
might have to download it again should the file get corrupted (you'll
have to anyway with the md5). Also, a lot of times a burn can be
botched for who-knows what reason. If the disk doesn?t work at all,
try a reburn.

Once the .iso file is done downloading, fire up your favorite
CD-burning software. Find the option to burn a CD image (for Nero, this
is under copy and backup) and burn it to a disk. Make sure you don't
just copy the .iso, you have to burn the image, which will unpack all
the files onto the CD.

Once the disk is done, put it in the CD-ROM drive and reboot the
computer. While your computer is booting, enter CMOS (how to get to
CMOS varies for each computer, some get to it by F1 or F2 or F3, etc.)
Go to the bootup configuration and place CD-ROM above hard disk. Save
changes and exit. Now, Knoppix will automatically start. You will be
presented with a boot prompt. Here you can input specific boot
parameters (called cheatcodes), or just wait and let it boot up using
the default.

note: Sometimes USB keyboards do not work until the OS has somewhat
booted up. Once you?re actually in Knoppix, your USB keyboard should
work, but you may not be able to use cheatcodes. If you need to,
attach a PS/2 keyboard temporarily. Also, if a particular aspect of
hardware detection does not work, look for a cheatcode to disable it.
Cheatcodes can be found on the Knoppix website in text format (or in
HTML at www.knoppix.net/docs/index.php/CheatCodes).

Upon entering the KDE desktop environment, spend some time exploring
around. Surf the web, get on IM, play some games, explore the
filesystem, and whatever else seems interesting. When your done, open
up the console (also called terminal, xterm, konsole, or even shell)
and get ready for the real Linux. See section V for what to do from
here.

note: to function as root (or the superuser) type su.


It's not entirely necessary that you are a console wizard at this point
(although you will need to be sooner or later), but a little messing
around wont hurt.

Just as there are many Linux distros, so there are also many types of
Knoppix. I won?t go into using any of them, but they should all be
somewhat similar. Some of them include: Gnoppix, Knoppix STD, Morphix,
and PHLAK. Other distros also have live-CDs.

III. Installing

I will guide you through the installation of Fedora Core 2. The reason
I chose Fedora is because it contains the Anaconda installer, which is
a very easy installer.

Download the discs from here:
http://download.fedora.redhat.com/pub/fedo...ore/2/i386/iso/
If the link doesn?t work, then go to www.redhat.com and navigate your
way to downloading Fedora (odds are your architecture is i386).
You will want to download the FC2-i386-disc1.iso and burn it using the
method for Knoppix. Do the same for all the discs.

Note: do NOT download the FC2-i386-SRPMS-disc1.iso files.

Now, once you?re ready, insert disc 1 into the drive and reboot.

The installer should come up automatically (if not, then see the
Knoppix section on CMOS).

Note: installer may vary depending on version. Follow directions best
you can using your best judgement.

1. Language: choose English and hit enter
2. Keyboard: choose us (probably) and hit enter
3. Installation media: choose local CDROM (probably) and hit enter
4. CD test: you can choose to test or skip
5. Intro: click next
6. Monitor: choose your monitor to the best of your ability, if you?re unsure, choose on of the generic ones
7. Installation type: choose which ever you want (default should be fine)
8. Partition: choose to automatically partition (unless you know what you?re doing)
9. Partition: the default partitions should suffice
10. Boot loader: choose your boot loader (grub for default)
11. Network settings: choose the correct settings for your network (generally, don?t mess with anything unless you know what you?re doing)
12. Firewall: you can choose a firewall if you want to
13. Language support: choose any additional language support you want
14. Time zone: pick your time zone
15. Root password: set your root password (root is the admin, or superuser; you want it to be very secure)
16. Packages: choose which packages you want to install. For hard drives over 10 gigs, you can go ahead and choose all
packages (depending on how much disk space you plan on taking up later, note that most everything you?ll need is a package: the exception
being large media files). You will generally want to install all the packages you think you?ll ever need. Two desktop environments aren?t necessary.
Make sure you have at least one and the X window system! (if you want a GUI that is). I suggest you get all the servers too.

Note: Knoppix uses the KDE Desktop environment

17. Make sure everything is all right, and install
18. You can create a boot disk if you want

Note: Desktop environments might have a set-up once you enter them

IV What to do now

Now that you have a Linux set-up and running, there are many paths you
can head down. First, you should explore your GUI and menus. Browse
the web with Mozilla, get on IM with GAIM, play games, add/delete
users, check out OpenOffice, and anything else that might be part of
your daily use. Also, set up a few servers on your computer to play
around with, specifically SMTP (*wink*wink*), FTP (vsftp is a good
one), and either telnet or SSH (OpenSSH is a good one). The setup and
use of these are beyond the scope of this tutorial, but researching
them could prove to be very educational.

The filesystem
The Linux (and Unix) filesystem is different from the normal Windows
that you?re used to. In Windows, your hard drive is denoted ?C:\? (or
whatever). In Linux, it is called the root directory and is denoted
?/?. In the / directory, there are several default folders, including
dev (device drivers) mnt (mount) bin (binaries) usr (Unix System
Resources) home, etc, and others. I encourage you to explore around
the whole file system (see section V) and research more.

Once you are well situated, it?s time to get into the heart and power
of Linux: the console. The next session will guide you through it and
set you on the path to finding out how to do stuff for yourself. You
will (probably) want to start learning to rely less and less on the
GUI and figure out how to do everything through the console (try
launching all your programs from the console, for example).